QC-100 Calibration Gas Bump Tester (850-1100-00)

QC-100 Calibration Gas Bump Tester (850-1100-00)

Gases supported
  • Internal pump provides continuous flow.
  • Adjustable output.

Stable, Safe, Reliable - The QC-100 from Advanced Calibration Designs provides a quick and easy method of checking the performance of gas detection systems.

Revolutionary - The QC-100 utilizes revolutionary technology allowing a calibration functional check or 'bump test; as needed. The unique QuickCheck Vials (QCV) utilize a stable, safe and reliable delivery method allowing ease of shipment, storage and use. The QC-100 is currently available for ammonia and hydrogen chloride as well as PPM ranges of hexane and toluene.

Simple - The QCV used in the QC-100 are small, disposable vials with a small amount of the gas to be tested in liquid form in a sealed inner ampoule. Breaking the inner ampoule allows the liquid to absorb into a filter which then diffuses out the gas. The motorized pump in the QC-100 provides a continuous output of calibration check gas, and the needle-valve allows users to adjust the amount of gas being generated. This gas concentration can be checked against a calibrated instrument for higher accuracy, or simply used as a bump test device.

Air Flow Rate:

0.5 to 1.0 LPM

Useful Vial Life:

Approx. 8 hours

Vial Warranty:

One Year


15.2cm x 5.8 cm x 0.9 cm



Relative Humidity (non-condensing):

0 - 100%

Operating Temperature:

5°C - 50°C

Battery Power:

2 alkaline "AA"