GENie O3 Ozone Calibration Gas Instrument  (750-0200-02)

GENie O3 Ozone Calibration Gas Instrument (750-0200-02)

Gases supported
Ozone (03): 0.2 to 1.0 PPM
Air flow rate: 0.2 @ 1.0PPM - 1.0 @ 0.2 PPM
Source life: 500 hours

The GENie O3 is the latest in our line of portable calibration gas standards. Small, lightweight and operating on four AA batteries, the GENie O3 can be utilized in its fanny pack by a technician climbing around equipment to calibrate the most difficult to reach ozone sensors. Plugged in to mains power, the instrument can calibrate hand held detectors right at your service bench.

  • Most accurate source of ozone calibration gas on the market
  • Selectable concentrations
  • Integrated microprocessor controlled feedback
  • Compact, portable handheld design
  • Long Life
  • Simple to use
  • English, French, German and Spanish user interfaces are available

Warm-up time (to 90%):

Approx. 2 minutes

L x W x H:

5"W x 3.88"H x 3.13"D


2 lb. (907 g)

Operating temperature:

0°C to 50°C

Relative Humidity (intermittent use):

0 -100%





Battery power:

4 Alkaline AA

Battery life:

6 hours

Ozone, Hydrogen, Ammonia, Chlorine, Chlorine Dioxide, Hydrogen Sulfide & Hydrogen Cyanide

Compact, hand-held, accurate, economical and rugged, this family of integrateable and expandable calibration gas instruments will generate a variety of gases from one modular instrument. As your calibration gas needs grow, so does the GENie, with integrated, expandable modules that provide for a cost effective solution.

  • A flexible and accurate instrument, providing unique cost savings vs, cylinders
  • From 50ppb to 1000ppm, user selectable, gas dependent specification
  • Mass flow feedback provides sample draw calibration capabilities.
  • No storage of gas required, generate when and how much you need
  • No shelf life problems, no wastage, no recycling of cylinders
  • 50 and 100 hour sources available.
  • English, French, German and Spanish user interfaces are available.
  • CSA and CE certified

How does the GENie Calibration Gas System work? Learn more!

The Genie can be configured for electrochemical generation for gases such as Cl2, ClO2 H2S, HCN and H2, with a UV lamp for Ozone or with a vial for a source such as ammonia.