The VersaCal and QuickCheck
Range
The VersaCal
Ammonia Calibration Gas Generator
1775 S. Pantano Road, Suite #140, Tucson, AZ, 85710 U.S.A.
Phone: (520) 290-2855 Fax: (520) 290-2860 e-mail: ACD@auptag.com
Advanced Calibration Designs is pleased to introduce the
VersaCal.
The VersaCal
provides state of the art technology allowing
ammonia
calibration gas generation utilizing a stable and reliable
medium. The
VersaCal
allows the ammonia concentration to be
changed within the
range of the vial, and three vial concentrations allow a total
range from 10 to 250 ppm.
The
VersaCal utilizes a small, disposable
vial with a known liquid concentration of the gas to be generated. This vial
emits a small quantity of
gas when placed in the
VersaCal.
A photoionization detector (PID) and mass flow controller are used in a process
control circuit, allowing precise
control of the calibration gas output. Simply select the
concentration desired and the instrument does the rest.
Specifications
Ammonia (NH3)
....................................................10
- 150 ppm
QuickCheck Vials (QCV)
Useful Vial
Life...................................................Up to 8+ hours
Vial Concentrations (ppm)......................................25,
50, 100
Note: Vial concentration is nominal. Output is controlled
by the VersaCal instrument to give concentrations above
and below those listed.
VersaCal Instrument
Initial Warm-up
time...................................................5 minutes
L x W x H.............8.50 x 4.25 x 3.00" (21.59 x 10.8 x 7.62
cm)
Weight..................................................................2.5 lb.
(1134 g)
Operating Temperature........................................0°
C to 50° C
Relative Humidity (Non-Condensing)......................0 - 100%
Accuracy...............................................................................±10%
Battery
Power.........................................................4 alkaline "C"
Battery Life.................................10 hours (at .5 LPM
flow rate)
The QuickCheck range - The QC 50 and QC 100
Low-cost disposable system with disposable vials,
for ammonia, toluene, hydrogen chloride and Hexane
bump tests.
QC50 - Full set from 150 USD - each vial gives up to
8 hours gas.
Low-cost disposable system with disposable vials, for ammonia, toluene, hydrogen
chloride and Hydrogen sulphide H2S
bump tests.
The QC-50
Click here for PDF data-sheet
The QC-50 from Advanced Calibration Designs provides a quick and easy method
of checking the performance of gas detection systems. The QC-50 utilizes
revolutionary technology allowing a functional check (or "Bump Test") as needed
or required by law. The unique QuickCheck Vials (QCV) utilizes a stable, safe
and reliable delivery method allowing ease of shipment, storage and use. The
QC-50 is currently available for ammonia and hydrogen chloride.
The QCV used in the QC-50 are small, disposable vials with a small amount of
the gas to be tested in liquid form in a sealed inner amoule. Breaking the
inner ampoule allows the liquid to absorb into a filter which then diffuses out
the gas. Simply squeezing the hand aspirated bulb will allow a test
concentration of gas to flow by the gas detector, verifying its operation.
The QC-50's features include:
The QC-100
Click here for PDF data-sheet
The QC-100 from Advanced Calibration Designs provides a quick and easy method
of checking the performance of gas detection systems. The QC-100 utilizes
revolutionary technology allowing a calibration functional check or "Bump Test"
as needed. The unique QuickCheck Vials (QCV) utilize a stable, safe and
reliable delivery method allowing ease of shipment, storage and use. The QC-100
is currently available for ammonia and hydrogen chloride as well as ppm ranges
of hexane and toluene.
The QCV used in the QC-100 are small, disposable vials with a small amount of
the gas to be tested in liquid form in a sealed inner ampoule. Breaking the
inner ampoule allows the liquid to absorb into a filter which then diffuses out
the gas. The motorized pump in the QC-100 provides a continuous output of
calibration check gas, and the needle-valve allows users to adjust the amount of
gas being generated. This gas concentration can be checked against a calibrated
instrument for higher accuracy, or simply used as a bump test device.
The QC-100's features include:
Indian
News
US users
click here for ACD's site 
