Chlorine Gas Generator for site and laboratory test and calibration


Chlorine Calibration Gas (Cl2)

Chlorine gas is a very commonly used toxic gas that can be found in many applications: most commonly, water, wastewater, swimming pools, and the chemical industry. If you have chlorine gas at your facility, you may be required to have sensors in the area where the Cl2 gas is stored. To ensure that they are operating correctly, you must calibrate chlorine gas detectors periodically.

The GENie EC is our most accurate, diverse, compact and user-friendly instrument. Certified calibration gas sources provide the equivalent of up to 100 compressed gas cylinders. Interchangeable gases, adjustable concentrations, demand flow capabilities and the ability to provide the lowest, most accurate concentrations in the industry make the GENie EC the smart choice for calibration professionals.


The GENie main module has a built-in mass flow sensor that measures the flow rate of the instrument. This information is used in two ways. With the pump engaged, it is used to control the pump to the desired flow rate over a range of 0.2 to 1.0 LPM. With the pump disabled, it is used to measure the airflow rate drawn through the GENie by an external pump (for use with EC module only). This information is used to determine the source generation rate to achieve the desired ppm. The flow meter should be calibrated against a primary mass flow standard every 12 months.

The position of the vial adjust is a rough adjustment depending on the concentration you have selected. The instrument will adjust flow to obtain the exact concentration. In general, a more open vial adjust will result in a higher flow rate and a more closed vial adjust will result in a lower flow rate. If at any time the unit is unable to produce the exact concentration selected, you will be notified with the above menu accompanied by the audible beep (single beep for low PPM. Double beep for high PPM.)

Specifications

Item Description

Part Number

EC Module for GENie System

750-0202-01

O3 Module for GENie System

750-0202-02

Airflow rate

Variable

Useful source life

8 hours/vial (12 pack included)

Warm-up time

< 30 seconds

LxWxH

5"W x 3.88"H x 3.13"D

Weight

2 lb. (907 g)

Operating Temperature

0°C to 50°C

Relative Humidity

0 -100%

Accuracy

+/-10%

Repeat-ability

+/-5%

Battery Power

4 Alkaline AA

Battery Life

Approx. 5 hours


​Please visit our shop for more ACD Calibration Gas Generators

We are proud to be the first and only authorised dealer of ACD Calibration Gas Instruments in the UK.

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.