What is bumping test?

A "bumping test" is not a commonly recognized term in the context of gas detectors or gas monitoring. However, based on the context, it seems like you might be referring to a "bump test," which is a procedure used to quickly check the functionality of gas detection instruments or sensors.

A bump test, also known as a function check or challenge test, involves exposing a gas detector to a small amount of a test gas with a known concentration. The purpose is to verify that the gas detector's sensors and alarms respond correctly to the presence of the test gas. This procedure is essential for ensuring that the gas detector is operational and capable of providing accurate readings and alarms when detecting hazardous gases.

During a bump test, the gas detector's response is observed, including the activation of alarms (audible, visual, or vibrating) and changes in readings displayed on the device. If the gas detector's response meets the expected criteria based on the concentration of the test gas, the bump test is considered successful. If the response falls outside the expected range, further action might be required, such as calibration or maintenance.

Bump tests are typically performed before each day's use of the gas detector or as recommended by the manufacturer. They provide a quick and convenient way to ensure that gas detection equipment is ready for use and capable of detecting hazardous gases effectively.

It's important to note that while the term "bump test" might be used informally, the correct terminology is "bump test" as described above.

We are proud to be the first and only authorised dealer of ACD Calibration Gas Instruments in the UK.

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.